TVI RUSE Bar

Purpose-built for law enforcement, the Tactical Vehicle Intervention (TVI) RUSE Bar was created to fill a critical gap in vehicle intervention tools where existing options fall short. Designed by those who understand the demands of the job, this rugged product offers both protection and performance during tactical stops.

The TVI RUSE Bar mounts directly into a standard 2" tow receiver with the choice of two mounting depths and is designed with two features in mind. First, to protect the rear bumper of the pursuit vehicle during intentional contact maneuvers. Second, if you have ever looked behind the rear bumper of a new vehicle, you will notice that the bumper is almost all plastic. The TVI RUSE Bar solves the problem of trying to control a vehicle with plastic by providing a reliable steel contact surface with the suspect vehicle’s bumper, helping maintain control and postive pressure, reducing the risk of pursuit vehicle bumper damage, bumper failure, or suspect escape. 

Constructed from tough 11-gauge US steel and fully welded throughout, this unit delivers the strength, durability, and confidence required in real-world tactical situations. Whether for patrol use or specialized units, the TVI RUSE Bar is the solution tactical teams have been waiting for.

Why should I buy the TVI RUSE Bar?

There are many generic hitch bumpers available on the internet. We have found in our experience conducting TVI’s in the real world is that those other options don’t stand up to the pressure and can fail at any time. The usual thickness of steel for these other products is usually about .06 inches thick, the TVI RUSE Bar is constructed of steel that is .120 inches thick. Our product is much stronger and will stand up to the force of vehicle on vehicle contact without bending or breaking.

The TVI RUSE Bar is designed to be non-vehicle-specific. Since police vehicles are often rotated, retired, or reassigned, the design of the TVI RUSE Bar allows it to be transferred between different vehicles. Unlike vehicle-specific equipment that becomes obsolete when the car is decommissioned, the TVI RUSE Bar offers long-term value by outlasting the vehicle itself. This means agencies don’t have to continually invest in new units every time a vehicle is replaced.

Currently only stocking the TVI RUSE Bar in primer. This is the most economical option and allows the end user to customize the RUSE Bar to their liking as well as offering ease of repair when the paint is damaged. Most customers paint theirs matte black or use a truck bed coating.

We thought about offering a powder coat option, and we may at a later date. The downside to powder coat is that while it is a strong and durable coating, once scratched or chipped the powder coat itself cannot be repaired. 

Free Shipping

Included:

x1 TVI Ruse Bar

Dimensions:

40” W x 13” D x 3” H

Hitch Pin Hole: 21/32 (slightly larger than standard 5/8 pin)

NOTICE: Our owner and only employee is full time law enforcement. There may be a lead time on products depending on volume of orders and other factors. Current estimation is 2-4 weeks. Please contact us with any questions! We will get back with you as soon as possible.

Recommended use

Our product is designed for use by law enforcement professionals trained in tactical vehicle interceptions and other emergency vehicle operations. As always, follow all agency policy and procedure, as well as local laws.

During Tactical Vehicle Intercepts at low to zero speed:

1. TVI is executed, TOUCH the TVI RUSE Bar to the target vehicle, standby and evaluate compliance

2. If compliance occurs, no further action is needed

3. If compliance does not occur, reverse into the front bumper of suspect vehicle to increase pressure and limit forward movement of suspect vehicle

4. If suspect vehicle attempts to break free, drive the equipped vehicle to maintain pressure on the suspect vehicles bumper.

5. Follow all agency SOP’s regarding TVI/Forcible Vehicle Contact

During Tactical Vehicle Intercepts at higher speed (Rolling road block):

1. With equiped vehicle in front of suspect vehicle, match speed of suspect vehicle

2. Upon execution of TVI, slow equipped vehicle to gain compliance

3. If compliance gained and suspect vehicle stops, revert to instructions above

4. If compliance not gained, slowly lower speed of equpped vehicle until TVI RUSE Bar is touching front bumper of suspect vehicle.

5. Once contact is made and other units are in place, continue to slow at a controlled pace until stopped. REvert to instructions above once stopped.

6. DO NOT cause high speed contact between vehicles.

As a tow device (each vehicle equipped with TVI RUSE Bar):

1. Wrap recovery strap around center of TVI RUSE Bar where diagonal supports are on both vehicles

2. Apply proper vehicle recovery techniques

Coating Recommendations

We highly suggest applying a coat of paint or other coating before installation and use. For optimum results, we recommend lightly scuffing the existing primer first and then applying the final coat of choice. Current stock of the TVI RUSE Bar is primed with self-etching primer before shipping to protect from corrosion in transit.

In our experience, Dupli-Color Truck Bed Spray withstands the elements well and does not fade as much as other products with prolonged sun exposure.

DISCLAIMER:

The TVI RUSE Bar is designed for professional law enforcement use as a rear vehicle bumper protector during tactical vehicle interventions. It is not certified, rated, or tested to withstand vehicle collisions or high-impact forces. Any incidental or intentional contact involving the product is at the full discretion and risk of the user. The TVI RUSE Bar has not undergone impact testing, crash certification, or engineering analysis for structural performance under collision conditions. As such, the manufacturer and seller make no guarantees, express or implied, regarding the product’s ability to prevent or reduce damage, injury, or vehicle harm during any impact event.

By purchasing or installing this product, you acknowledge and accept that its use may involve risks, including potential damage to vehicles, property, or personal injury. Neither the manufacturer nor the seller accepts any liability for consequences resulting from use, misuse, or incorrect installation. It is the user’s sole responsibility to ensure compliance with all applicable laws, departmental policies, and safe operational practices. Improper installation, unauthorized modifications, or use outside its intended purpose voids any and all warranties and increases the risk of failure or harm. Always inspect the product before use and discontinue use if any signs of damage or stress are present. Use at your own risk.